Why Does My Pc Start Up Again When I Shut It Down

Contents

• 1 Why Windows x Restarts After Shutdown?
• ii What To Practice When Figurer Restarts Later on Shutdown?
  • two.1 Solution i: Perform A Make clean Boot
  • two.two Solution 2: Enter Rubber Kick
  • 2.3 Solution 3: Disable Automatic Restart After System Failure
  • 2.4 Solution 4: Plow Off Fast Startup
  • 2.5 Solution 5: Force Shutdown Using Command Prompt
• 3 Wrapping Up

If your Windows 10 restarts later shutdown, and so you are not the merely i facing this event. This issue has been effectually for many years and still hasn't been stock-still entirely by Microsoft.

The estimator restarting subsequently shutdown can be very annoying for users. Because of this, many users just plough off the power after the computer shuts down so that information technology doesn't have fourth dimension to restart again. But that'southward not a solution to the issue and anyway it won't work for laptop users.

In this commodity, we take discussed what tin trigger this effect and also some troubleshooting methods that can fix this problem.

Also, check out this article on what to practice when Windows update gets stuck.

Why Windows 10 Restarts Afterward Shutdown?

If the Windows 10 won't shut down and just restarts once again, then it seems that the computer is crashing at the moment of the shutdown, which is why information technology restarts back. There is a characteristic in Windows ten that volition restart the computer if it crashes , which is what this issue probably looks like.

As the Windows 10 crashes at the moment of the shutdown, the user doesn't notice the crash and think the computer just restarts after shutdown. The computer can crash due to both hardware and software failures.

Some users, nonetheless, have also reported that the Fast startup feature is responsible for this issue. Now, that the causes of this issue are known information technology'southward fourth dimension to troubleshoot.

What To Do When Estimator Restarts Later Shutdown?

Read and execute the following solutions carefully and this upshot should go fixed.

Solution 1: Perform A Clean Boot

As mentioned above, the computer probably crashes during the shutdown, which causes information technology to restart again. In this scenario, performing a clean boot should disable all the unessential apps and services, which can lead to the crash.

To perform a clean kick, follow the steps given beneath:

1. Press the Windows + R keys to open up the Run utility.
2. Blazon msconfig and press Enter to open the System Configuration dialog.

3. Select the Services tab and check the Hide all Microsoft services box.
4. Click on the Disable all choice to disable all the unnecessary services.

5. At present, click on the Startup tab and then click on the Open Job Manager option.
   The Task Director will open on your screen.
6. Select the Startup tab and disable all the apps in the listing.
   Correct-click on the app and select the Disable option.

7. Finally, restart your figurer to boot in the clean boot surroundings.

Afterward the computer restarts, shut down once again. If the computer shuts downwardly properly, and then one of the services or apps you merely disabled is the culprit. However, if still the PC won't shut down and simply restarts, and then try the next solution.

Solution 2: Enter Safe Kicking

If performing a clean boot didn't work, then try entering the Condom Kicking. In safe boot all the unnecessary drivers are disabled. So, if the issue is caused by faulty drivers, so the upshot should get resolved.

To enter safe boot, follow the steps given below:

1. Open the Organisation Configuration dialog again.
2. Select the Kick tab.
3. Check the Safe boot box and then select the Minimal choice.

4. Finally, click on Apply and OK and then restart the computer.

Shutdown the computer after it boots in desktop and so check if the PC shuts down without restarting. If the PC shuts down properly, then faulty drivers are the culprit for this outcome.

Solution 3: Disable Automated Restart After System Failure

When the system crashes, the calculator restarts on its ain. Disabling this characteristic should finish the computer from restarting if the organisation crashes during the shutdown. Sometimes the computer restarts after sleep likewise, this issue most likely occurs due to organization failure so disabling automatic restart should solve this problem likewise.

To disable automatic restart afterwards a arrangement failure, follow the steps given below:

1. Open the Run utility once again.
2. Type sysdm.cpl and press Enter to open up the System Properties.

3. Select the Advanced tab and click on the Settings selection in the Startup and Recovery

4. In the System Failure section, uncheck the Automatically restart box.

5. Finally, click on OK to save the changes.

Now, shut down your figurer. If still Windows 10 won't shut down and simply restarts, then about likely the issue is not caused by system failure during the shutdown. Endeavour the side by side solution and see if it works.

Solution 4: Turn Off Fast Startup

If the higher up solutions didn't piece of work, so try disabling the Fast startup feature. Many users have reported that disabling the Fast startup characteristic fixed this issue for them. If the computer is not restarting considering of system failure, and then Fast startup seems the most likely culprit.

The Fast startup feature was introduced as a way to decrease the boot time taken by Windows. Yet, the feature has been reported for instigating various errors and bugs over the years.

To disable Fast startup, follow the steps given below:

1. Type Power & Slumber settings in the Windows search bar and select the acme option.
2. Select the Additional ability settings in the Related settings section.
3. Click on the Cull what the power buttons practise option.

4. Select the Change settings that are currently unavailable selection, which would allow you change the Shutdown settings.
5. Uncheck the Turn on fast startup (recommended) box and click on the Save changes option.

Subsequently disabling the Fast startup, cheque if withal Windows x restarts afterwards shutdown.

Solution five: Forcefulness Shutdown Using Command Prompt

If disabling Fast startup besides didn't work, then try executing a force shutdown using the Command Prompt. To execute Strength shutdown, follow the steps given beneath:

1. Type cmd in the Run utility and press the Ctrl + Shift + Enter keys.
   An elevated Command Prompt will open up on your screen.
2. Blazon shutdown /south /f /t 0 and printing Enter.

Now the computer should shut downward.

Wrapping Up

 And then, there you take information technology. Now you lot know what to do if Windows 10 restarts subsequently shutdown once more. If the effect is caused due to system failure or crash, so Solution three should work. Don't forget to share your views and opinions on this commodity in the comment section beneath.

garzaconew1945.blogspot.com

Source: https://digicruncher.com/windows-10-restarts-after-shutdown/

Bagikan Artikel ini